Historical Model Shop

Historical Model Shop › Scale model boat plans

Free scale model boat plans Build it small first

Two boats designed in-house, drawn as true-scale model patterns you can print at home or cut on a laser or CNC, or 3D print in one piece. Every pattern was checked against the full-size design before it went up here. Pick a boat, agree to the terms, and download one file at a time.

The Wilderness Canoe

A 15 foot cedar-strip canoe, as a 14 inch model.

Computer picture of the cedar-strip Wilderness Canoe floating on a lake
Computer picture of the Wilderness Canoe from the side Computer picture of the Wilderness Canoe from the bow

Computer pictures of the finished boat. Photos of a real model are coming soon.

  • Model length 14″, scale about 1:12.9 (about 15/16″ to the foot)
  • Beam 2.64″, built upside down over 13 molds and 2 stem forms
  • Molds from 1/8″ plywood, balsa or foam board; planked with 1/32″ basswood strips
  • Patterns: 2 letter-size pages, printed at actual size, with a 1″ check square on every page

Free download

PDF to print and cut by hand; DXF (inches) for a laser or CNC.

3D print it in one piece

The whole canoe with seats, yoke and rails as one solid piece, 1.6 mm walls. The 9″ fits most home printers; the 14″ is 356 mm long (big printer, or cut it in two in your slicer). Printing tips are in the download.

Display stand

A 3D-printed stand with the canoe's name engraved on the base, cradles shaped to the hull. Both sizes (14″ and 9″) are in the download, and each fits a printed or a hand-built model.

Full-size plans are available for a small fee once we receive photos of your finished model.

Send photos of my model

The Poor Boy Fishing Boat

A 14 foot flat-bottom plywood fishing skiff, as a 15 inch model.

Computer picture of a father and son fishing from the Poor Boy Fishing Boat on a lake
Computer picture of the Poor Boy Fishing Boat from the side Computer picture of the Poor Boy Fishing Boat from the stern

Computer pictures of the finished boat. Photos of a real model are coming soon.

  • Model length 15″, scale about 1:11.2 (about 1-1/16″ to the foot)
  • Beam 4.82″; sides and bottom are flat developed shapes that bend into the hull
  • Sides about 1/32″, bottom about 3/64″, frames and transom about 1/16″ (plywood or basswood sheet)
  • Patterns: 7 letter-size pages; long parts are split over two pages with a join line

Free download

PDF to print and cut by hand; DXF (inches) for a laser or CNC.

3D print it in one piece

The whole boat with seats, frames, transom with motor notch and rails as one solid piece, 1.6 mm walls. The 9″ fits most home printers; the 15″ is 381 mm long (big printer, or cut it in two in your slicer). Printing tips are in the download.

Display stand

A 3D-printed stand with the boat's name engraved on the base, cradles shaped to the hull. Both sizes (15″ and 9″) are in the download, and each fits a printed or a hand-built model.

Full-size plans are available for a small fee once we receive photos of your finished model.

Send photos of my model

Questions people ask

Are the model boat plans really free?

Yes. The patterns (PDF), the laser and CNC parts (DXF) and the 3D print models (STL) are free for your own personal use. Agree to the terms, type your name and email, and download one file at a time.

What do I need to build the canoe model?

1/8 inch plywood, balsa or foam board for the 13 molds and 2 stem forms, and 1/32 inch basswood strips for the planking. The patterns print at actual size on 2 letter-size pages, with a 1 inch check square on every page.

What do I need to build the fishing skiff model?

Plywood or basswood sheet: about 1/32 inch for the sides, about 3/64 inch for the bottom and about 1/16 inch for the frames and transom. The patterns print on 7 letter-size pages.

Can I 3D print the boats?

Yes. Each boat comes as a one-piece STL model with 1.6 mm walls. The 9 inch size fits most home printers; the full 14 inch canoe and 15 inch skiff need a big printer or can be cut in two in your slicer. A printed display stand is a free download too.

Can I cut the parts on a laser or a CNC?

Yes. Each boat has a DXF file of its parts, drawn in inches, for a laser or a CNC.

Can I get full-size plans for these boats?

Full-size plans are available for a small fee once we receive photos of your finished model.

Help keep these free

If these plans saved you time or got you building, you can chip in through PayPal to lee@scanningpros.com. It helps cover the cost of hosting this site and keeps the plans free for everyone.

Historical Model Shop is a business, so this is a thank-you, not a tax-deductible donation. Anything you send is completely optional.

Have a part you can't buy anymore?

Our other shop, Scanning Pros, 3D scans it, reverse engineers it and gives you a CAD file ready for your machine shop.

See what Scanning Pros does

Download:

Please read before downloading.

These scale-model patterns are provided free for your personal use, as-is, with no warranty of any kind.

You build at your own risk. Building a model involves sharp tools, glue, finishes and power tools; follow the makers' safety instructions, wear eye protection, and supervise children. A finished model is a display model, not a toy or a flotation device.

Historical Model Shop, Scanning Pros and W. L. Thomas are not responsible for any injury, damage or loss that comes from downloading, building or using a model or anything built from these patterns.

A model is not a full-size boat. Do not build a full-size boat by enlarging these patterns.

The patterns may not be sold, shared, or posted elsewhere without written permission.